I-VIEW CP-2400AS DRIVER

Please download the FixAVI. When transmitting video between passive video Balun, the video is wavy and there is a dark bar that rolls upward on the monitor. Already have an account? Rather, disconnect any equipment and use a low-value capacitance meter. If using a camera, check positioning of the lens to be sure it's not aimed at the sun or a reflection. Use caution when installing multi-pair wire that has a solid white wire and a solid blue wire, as the white wires all look the same. It will show the diagram as below when finish the repair file.

Uploader:	Dajind
Date Added:	22 October 2014
File Size:	63.53 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	29265
Price:	Free* [*Free Regsitration Required]

161 results.

We expect no more than about mV AC. Allow to record of both recording modes Schedule and Motion detection at the same time.

Pc-2400as the Port number from your Router for the Mobile phone access. This calculation shows that at these speeds, the system acts more like a lumped-element circuit than a transmission line. Cooling fan might make much noise as it goes on with much dust on it. Register a new account.

CPAS - Video Capture Card - Digital Recorder - Products - Ameba Technology Inc.

Normally this is a single path, with no wires going un-expected places. It possible cause for the error is corrupted database files.

Some of i-vlew energy continues in the right direction, but some goes down the wrong way into the bridge-tap. See the diagram as below: If you get them mixed up, do not use an ohmmeter to identify. There are several ways around c-2400as Please follow up the process as below to repair the video clips. There is a way to download the software thru their FTP, talk to this person, and he'll tell you how.

Check the connection on the cameras.

Or download it from our website: This path can be coax, UTP, or other media. It can avoid this problem. Please check the wave file of notification meets the request or ii-view.

Ameba Technology,

We'll put surge protectoer on both camera and DVR equipment. Please make sure the process as below to check the problem: Please download the "msvcr They will give damage to the HDD. The MPEG 4 allows to changing the compression rate, sharpness and key frame. Double click the IP camera number to connect the camera and parameters setting.

It does not mean that the DVR was shut down so please reconnect to the correct IP address after waiting a little while. Reinstall the DVR software to get the default back. Using a multi-pair wire six pairs or more with an overall shield is OK. To turn off Windows 7 System Restore: Please contact your cp-200as for the license code.

Allow setup the individual notification for each Motion detection schedule.

The output level of Microphone over 2 Vp-p is strongly recommended. Please refer to the below configuration. Energy cannot just shoot off the far end of i-vie bridge-tap wire, so it reflects back in the direction from which it came. PD sends to PSE: When transmitting video between passive video Balun, the video is wavy and there is a dark bar that rolls upward on the monitor.